Details Out of stock FD1.350 COMPACT MONO AMP The FD 1.350 is a mono block amplifier specifically designed for handling a subwoofer channel. It has a power of 210 and 350 Watts RMS under 4 and 2 Ohms respectively. In order to configure the system’s bass according to the car’s installation; it is equipped with an active crossover, bass correction and phase adjustment. -Mono D Class amplifier with dual output -High-level inputs with auto-detection / RCA low-level inputs -Compatible with OEM head units thanks to the audio transformers – auto detection feature
Details Out of stock FD2.350 COMPACT 2-CH AMP The FD 2.350 is a 2-channel model delivering a power of 2 x 105 Watts RMS under 4 Ohms. For a perfect matching, it’s featuring an active high-pass and lowpass crossover. The FD 2.350 can consequently drive a pair of speaker drivers or a subwoofer. Stereo D Class bridgeable amplifier High-level inputs with auto-detect / RCA low-level inputs Compatible with OEM head units thanks to the audio transformers – auto detection feature
Details Out of stock FD4.350 COMPACT 4-CH AMP The FD 4.350 is the 4-channel model (4 x 58 Watts RMS) and the most versatile of the range. It can operate in 4, 3 or 2-channel mode. In most cases, it will be used to amplify a car’s front and rear speaker drivers. It can also be used to drive front speaker drivers and a small subwoofer, for a small installation which stays simple and integrated. 4/3/2-channel D Class amplifier High-level inputs with auto-detect / RCA low-level inputs Compatible with OEM head units thanks to the audio transformers – auto detection feature
Details Out of stock FPS 1500 MONO AMPLIFIER The FPS 1500 mono subwoofer amplifier delivers up to 550 watts RMS to a 2-ohm sub — plenty enough to fill most vehicles with clean and powerful bass. This amp can handle low-impedance loads, so you can power a 1-ohm sub with 800 RMS watts of thunder. Low-pass and subsonic filters, a bass boost, and a phase switch let you tailor the sound to complement your vehicle and sub enclosure.
Details Out of stock FPS 2160 2-CH AMPLIFIER The FPS 2160 2-channel amplifier sends 105 watts RMS per channel to a pair of full-range speakers or a set of components — plenty enough to fill your vehicle with clean and powerful sound. Or, you can switch this amp to single-channel mode and drive a subwoofer with 360 watts RMS of bass thunder. High-pass, low-pass, and band-pass filtering adjusts the output to match a wide variety of speakers, components, and sub combinations.
Details Out of stock FPS 2300RX 2-CH AMPLIFIER The FPS 2300RX 2-channel amplifier sends 155 watts RMS per channel to a pair of full-range speakers or a set of components. This amp can also handle low-impedance loads, so you could power a pair of 1-ohm subs with 430 RMS watts each in stereo mode. Or, you can switch this amp to single-channel mode and drive a single subwoofer with 750 watts RMS of bass thunder. High-pass, low-pass, and band-pass filtering adjusts the output to match a wide variety of speakers, components, and sub combinations. A bass boost and wired remote give you even more control over your subs’ performance.
Details Out of stock FPS 3000 MONO AMPLIFIER The FPS3000 amplifier is a 1500W monochannel power amplifier based on the FPS 1500 technology, Class D technology and Aluminum alloy dissipation basket with T fins to ensure optimized ventilation and reduce overheating risks.
Details Out of stock FPS 4160 4-CH AMPLIFIER The FPS 4160 4-channel amplifier sends 120 watts RMS per channel to your front and rear pairs of full-range speakers or components. You can use this versatile amp to power four 2-ohm subs with 200 watts RMS each, or switch to 2-channel mode and drive a pair of subs with 380 watts RMS each. You can even power your front speakers with two of the amp’s channels while bridging the rear channels to drive a single sub. High-pass, low-pass, and band-pass filtering adjusts the output to match a wide variety of speakers, components, and sub combinations. And a wired remote level control for the rear cahannels give you even more control over your subs’ performance.
Details Out of stock FPX1.1000 MONO AMPLIFIER The FPX 1.1000 is a very compact mono amplifier with a power of 420 Watts RMS at 4 Ohms. Specially designed for powering a subwoofer, this amplifier combines very high power and some great features. Stable at 2 Ohms and 1 Ohm, equipped with a complete range of settings for adjusting low-frequency sensitivity, a remote control and output lines, this amplifier is capable of bluffing performances. Whether it’s for powering an audiophile bass system or a powerful subwoofer, the FPX 1.1000 will meet all your needs for your bass channel.
Details Out of stock FPX2.750 2-CH AMPLIFIER The FPX 2.750 is a very compact 2-channel amplifier with a power of 2×220 Watts RMS at 4 Ohms. Thanks to its 2-/1-channel mode, its stability at 2 Ohms, the numerous settings and the output lines, the FPX 2.750 is an extremely versatile solution. Its very high power makes it just as ideal for multi-channel systems as it is for powering a subwoofer. Offering high power and musicality, this amplifier is ideal for getting the best out of the high-end speaker drivers in our Performance line.
Details Out of stock FPX4.400SQ 4CH AMPLIFIER The FPX 4.400 SQ is a very compact 4-channel amplifier with a power of 4 x 70 Watts RMS at 4 Ohms. Offering a 4 or 2-channel mode, stable at 2 Ohms and equipped with an active crossover for each pair of channels, makes the FPX 4.400 SQ very versatile and suitable to a range of system designs. Thanks to its high power, this is the ideal amplifier for powering front and rear speaker drivers, or for hi-fi installations with a 2-way kit in the front and a subwoofer. The 2-/4-channel input modes ensure compatibility with head units only equipped with a pair output lines. The high power and musicality of this amplifier will ensure you get the best out of your high-end speaker drivers from our Performance line.
Details Out of stock FPX4.800 4/3/2-CH AMPLIFIER The FPX 4.800 is a very compact 4-channel amplifier with a power of 4×120 Watts RMS at 4 Ohms. Offering a 4-/3-/2-channel mode, stable at 2 Ohms and equipped with an active crossover for each pair of channels, the FPX 4.800 is the most versatile model in this range. Thanks to its very high power, this is the ideal amplifier for powering front and rear speaker drivers, or for hi-fi installations with a 2-way kit in the front and a subwoofer. The 2-/4-channel input modes ensure compatibility with head units only equipped with a pair output lines. The high power and musicality of this amplifier will ensure you get the best out of your high-end speaker drivers from our Performance line.
Details Out of stock IMPULSE 4.320 COMPACT 4-CH AMPLIFIER Head unit amplifiers (whether OEM or aftermarket) soon reveal their limits in terms of power and dynamics. At high volume, they soon saturate and ruin the listening pleasure. To compensate for this and to enable you to get the best out of your speaker drivers, Impulse 4.320 is the ideal solution.
Details Out of stock MRV-F300 $349.00 V-Power is back and stronger than ever! V-Power amps feature speaker level inputs that connect directly to almost any factory radio, without the need for external converters, so you can keep your factory system and upgrade to Alpine sound. With a non shut-down design, even if you pound your music for a long time, these amps won’t shut down. They use a heat thermal management processor to make sure the heat level never gets too high – which means no distortion and no interruptions.