V-Power Mono Amplifier

Out of stock


The MRV-M1200 further elevates V-Power’s reputation of reliability and performance with an enormous output of 1200W RMS @ 2 ohms. Its fourth generation all digital-design enables high efficiency and extreme power to drive hard hitting bass without distortion. Priced at $599 it provides an amazing dollar per watt ratio.

Its Class-D technology provides continuous, clean power and superior sound quality to the subwoofer so you can enjoy powerful bass, even during extreme power demands. Moreover, dual feedback modulation technology previously found only in the PDX and X-Power amplifiers is now integrated into V-Power mono amplifiers. This means that the audio signal is analysed, compared, and corrected twice dynamically as the signal is processed through the amplifier. The result is the widest frequency response, higher damping factor and lowest noise in its class.

With the enclosed RUX-KNOB bass knob you have full control for remote on-the-fly bass adjustments, without adjusting the amplifier itself. Additionally, you have the ability to control up to 10 V-Power mono amps using just this one RUX-KNOB with simple telephone jack adapters. What’s more is the advanced non shut-down performance design. Thanks to the Thermal Management processor, it takes longer for protection mode to kick in, and a gradual gain down is used so that there is no abrupt interruptions in playback. Plus, the heat sink capacity is 30% larger in volume than its predecessor, keeping the amplifier from getting too hot even in high power demand.



• Mono Class-D Digital Amplifier
• Thermal Management Processor
• Dual Feedback Modulation Technology
• Bass EQ Function
• Crossover: Variable LPF
• 1200W RMS x 1 @ 2 ohms 
• 600W RMS x 1 @ 4 ohms
• Freq. Response: 10 Hz – 400 Hz
• Size (WxHxD): 342 x 55 x 219mm
• Remote Bass Control Included (RUX-KNOB)


CEA-2006 Power Ratings

  • CEA-2006 Power Rating: 600W RMS x 1 (4-ohm, 14.4V at <1% THD+N)

RMS Power Ratings

  • Per channel into 4 Ohms: 600W RMS x 1 (14.4V at <1% THD+N)
  • Per channel into 2 Ohms: 1200W RMS x 1 (14.4V at <1% THD+N)

Sound Tuning

  • Crossover Frequency (LPF): 50 – 400 Hz, -24dB/oct.
  • EQ (Equalizer): 0 to +12dB, fc=50Hz


  • Foot Print (WxHxD) mm: 342 x 55 x 219 mm
  • Foot Print (WxHxD) in: 13-1/2” x 2-1/4” x 8-5/8”


  • Power Requirements: 14.4 V.DC (11-16V allowable)
  • Input Sensitivity (RCA Input): 0.15 – 4.0 V
  • Input Sensitivity (Speaker Level Input): 0.4 – 10 V
  • Input Impedance: >10k ohms
  • Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 7 -400 Hz
  • THD+N (10W into 4 Ohms): <0.02 %
  • THD+N (10W into 2 Ohms): <0.03 %
  • THD+N (Rated Power into 4 Ohms): <0.2 %
  • THD+N (Rated Power into 2 Ohms): <0.3 %
  • Damping Factor (10W into 4 Ohms at 100Hz): >750
  • Signal to Noise (1W into 4 Ohms): >85 dB
  • Signal to Noise (Rated Power into 4 Ohms): >105 dB
  • Preamp Output: 4.0V Max.
  • Remote Level: -20 to 0 dB
  • Weight: 1.8 kg



  • Terminal Layout: Two-Sided
  • Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals


  • Amplifier Type: Class-D (Digital)
  • Channel Design: 1 Channel (Mono)
  • Power Supply Design: DC-DC PWM Power Supply
  • Power Supply: MOSFET
  • Pre-Amp Stage: Discrete
  • Final Outputs: Power MOSFET
  • Crossover: Variable Lowpass Filter
  • Gain Control: Continuously Adjustable Gain Control
  • Bass EQ: Bass EQ Function
  • Bass Control: Remote Bass Control (RUX-KNOB) Ready
  • Remote Turn On: Remote Sensing Function (for RCA Input & Speaker Input)
  • Low-impedance Possibility:
  • Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection
  • Board Circuitry: S.T.A.R. Circuit
  • RCA Output: Non-Fading Pre-Amp Output (4 Volts)
  • Speaker-Level Inputs: 4-channel Speaker Level Inputs
  • Power Indicator: Top Mounted Blue LED Power Indicator
  • Thermal Control: Multi-stage Power Limits


There are no reviews yet.

Be the first to review “MRV-M1200”